Specifications:
- Built in kit
- 4 Hole connector
- connect to handpiece line directly
1.Link way:4 or 6 hole teeth chair general autoclavable.
2.Opertion air pressure:0.3Mpa-0.4Mpa
3.Sand amount:1.5g/min-3.59g/min
4.Blasting hole:Φ0.5mm
5.Blasting head can rotate to 360°
Installation
Plug to the handpiece hose directly to this unit, than the installation is finished.
caution: You must check if there is remaining water in the handpiece cable before installation.
If there is, you must dry it firstly, then install it.
Recommended powder
We recommend a particle size of 30 to 50 μm high purity powder (99% ).
It’s easy for the powder to absorb moisture from the air , It would cause agglomeration,
resulting in performance
degradation. After install the powder, you should closed the cover of the bottle immediately
to make sure its tight cover.
The dry powder should flow freely, the wet powder does not flow easily or lumps.
Extraoral application
For surface cleaning and micro-roughening treatment before pasting
metal/Porcelain
Fiber post
Inlay/Onlays
maryland bridge
Orthodontic bracket
removing the cement in the original adhesive layer before second pasting
Cast metal prosthesis defect detection
Application in oral
In the repair treatment, micro roughen surface of porcelain or composite.
Package Included:
Handpiece
powder jar
Steel Needle
mini wrench